DJI Matrice 600 Hexacopter


FREE Shipping & Returns on this item.
Please be advised that orders may take 1-2 days to process before shipping.



  • Works with Zenmuse Gimbals / Cameras
  • Works with Ronin-MX Gimbal
  • Up to 33 Pound Total Take-Off Weight
  • Integrated Lightbridge 2 Support
  • Full HD 1080p Live Monitoring
  • DJI A3 Flight Control System
  • Controllable with DJI Go App
  • Retractable Landing Gear
  • Collapsible Design for Easy Transport
  • Powers from Six Flight Batteries

Supporting a total takeoff weight of 33.2 pounds the Matrice 600 (M600) is a hexacopter from DJIdesigned for professional video and industrial imaging applications. It is centered around DJIs advanced A3 flight control system and incorporates the Lightbridge 2 system for HD resolution low-latency monitoring via SDI HDMI and USB outputs on the controller. For camera support the M600 works with Zenmuse Z15 series gimbals the Ronin-MX gimbal and Zenmuse X Series gimbal/camera hybrids.

The M600 comes almost-ready-to-fly (ATF) including controller (transmitter) flight batteries charger flight controller and sundries. Additional hardware needed may include a gimbal camera as well as any flight controller add-ons. Some assembly is required.


Intelligent Drive System
The M600 uses sine-wave driven intelligent ESCs to ensure it performs accurately safely and efficiently while the A3 flight controllers self-adaptive systems adjust flight parameters automatically based on different payloads

Air System Design

Modular Design
The modular design makes the Matrice 600 easy to set up and ready to use
Gimbal Compatibility
All Zenmuse cameras and gimbals are natively compatible and a maximum payload of 13.2 lb allows it to fly the Ronin-MX gimbal and a range of cameras from Micro Four Thirds systems to the RED EPIC
Built to Last
A dust-proof propulsion system simplifies maintenance while actively cooled motors make for reliable operation for extended periods of time

A3 Flight Controller

GNSS-based A3 acts as the brains of the aircraft. Using data from the GPS compass and various sensors it provides navigation a stabilization with varying degrees of autopilot redundancy depending on user settings. An array of expansion ports allows you to connect optional DJI and third-party equipment
DJI GO App for iOS and Android
The M600 supports the DJI GO app as well as the DJI Assistant 2. Get a live HD view battery status redundancy status transmission strength and much more straight from the DJI GO app. DJI GO is also the control center for the camera giving access to shutter speed ISO photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The DJI Assistant 2 supports firmware updates and the new Ground Station and comes with a built-in flight simulator
Extended Range
The Matrice 600s radio range extents to 3.1 miles with a clean signal
A3 Pro Upgrade
The separately available A3 Pro upgrade brings triple redundancy to the Matrice 600s flight controller. It features diagnostic algorithms that compare sensor data from the three sets of units in real-time helping ensure the aircraft flies as expected especially important in professional filmmaking and industrial environments
D-RTK GNSS Upgrade
The A3 GNSS system can be upgraded with separately available Real-Time Kinematic technology (RTK) for even greater navigational accuracy. Using dual antennas RTK provides greater precision than a compass and is not susceptible to magnetic interference from metal structures

Lightbridge 2

Professional HD Transmission
DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting offering high frame rates and HD live streaming. USB mini-HDMI and 3G-SDI ports on the controller support video output at up to 1080p/60 fps or a broadcast standard output of 720p/59.94 fps and 1080i/50 fps


The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices including the Guidance sensor system the RTK GNSS units or third party components of your choice

Payment & Security

PayPal Venmo

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed